Seat position memory can store the position of the driver seat, steering wheel, side mirrors, and head-up display. When seat position has been saved to a profile, that profile can be restored through the center display or by voice command.
Seat position memory is activated on the center display. Either navigate to
, or :
|
1. |
Press  in the Car status display at the top of the center display.
|
|
2. |
Press User center in the pop-up window.
|
|
3. |
Select Driver position . |
There are three options to choose from:
The Save button stores the current positions of the driverseat, steering wheel, side mirrors, and head-up displayin the current configuration slot.
The Restore button restores previously saved positions of thedriver seat, steering wheel, side mirrors, and head-up display from a configuration slot of your choice.
The Save as button stores the current positions of the driverseat, steering wheel, side mirrors, and head-up display in a configuration of your choice.
Note: The restore button can only be used when the car is in P.
Note: The save as button can not be reached from the user center.
Position memory shortcut window
The shortcut window will pop up on the center display when the following conditions are met:
|
• |
A driver seat control button, besides the lumbar support button, is operated |
Note: The pop-up window does not appear when the center display is in a high-priority interface, such as the reverse camera view.